ONE POD. COMPLETE WATER SOLUTION.

Preparing your experience ...
WATER SOLUTIONS. ENGINEERED AROUND YOU.
Smart Water. Better Living. Sustainable Solutions.
Home Our Pods SandPod
SUSPENDED SOLIDS FILTRATION

Clear Water Starts with Better Filtration.

Meet WATERPOD SandPod / Sedifree — a filtration stage designed to reduce suitable suspended particles from water and help protect downstream treatment equipment.

Every water source is different. Start with water testing.
WATERPOD SandPod sediment filtration system
Media Filtration Suspended particle reduction
Backwash Support Where system design permits

When water carries more than it should.

Water may contain suspended sand, silt and other filterable particles. These solids can affect water clarity and contribute to the loading of downstream equipment.

SandPod / Sedifree is intended as a filtration stage for suitable suspended particles, selected according to the actual water characteristics and site requirements.

Sand & Sediment

Visible particles that may enter the water supply from the source or distribution system.

Suspended Solids

Filterable material carried in water that may require suitable media filtration.

Water Cloudiness

Cloudiness can have different causes and should be assessed through appropriate water testing.

Inside the SandPod process.

Water passes through a selected granular media bed that retains suitable suspended particles.

INLET
OUTLET
GRANULAR MEDIA FILTRATION
01
STEP ONE

Water Enters the Filter

Incoming water flows into the filtration vessel through its designed inlet arrangement.

02
STEP TWO

Media Retains Particles

Water moves through the selected granular media bed, which retains suitable suspended solids.

03
STEP THREE

Filtered Water Moves Forward

Water leaving the filtration stage can move to the next treatment stage when required by the overall system design.

04
MAINTENANCE

Backwashing Removes Accumulated Solids

Where the valve and vessel configuration support it, backwashing helps remove accumulated solids from the media bed.

Filtration for different water applications.

SandPod selection depends on the source-water analysis, suspended-solids characteristics and application needs.

Homes & Apartments

Considered for suitable sediment and suspended-solids concerns in building water supplies.

Borewell Water

A possible pretreatment stage when testing identifies suitable filterable particles.

Commercial Buildings

Can be evaluated as part of a centralised building water-treatment arrangement.

Surface Water Systems

May be considered for pretreatment where suspended solids are confirmed by testing.

The right filter starts with the right assessment.

Not every water source needs the same filtration arrangement. Media selection and system sizing should be based on actual water and site conditions.

  • Water source and quality
  • Particle characteristics and solids loading
  • Required filtration rate
  • Backwash flow and drainage arrangements
  • Available installation space
Discuss Your Water Requirements
WATER ASSESSMENT

Understand your source before selecting your system.

Water source
Suspended solids
Flow requirement
Backwash arrangement

Important Selection Note

A granular sand filter is not a universal dissolved-contaminant treatment system. It primarily targets suitable suspended particles. Media, filtration rate, backwash flow and wastewater arrangements must be selected for the actual water quality and site conditions.

Better filtration begins with better understanding.

Tell us about your water source, application and concerns. Start your WATERPOD assessment with the information that matters.

Facebook Instagram YouTube
Chat with us Call us